Main technical indicators of the speaker

Main technical indicators of the speaker

The multi-speaker market is mixed, and the price ranges from tens of yuan to thousands of dollars. How to choose a suitable speaker according to your application needs has become a problem that plagues many people. What kind of speaker is a really good speaker? Especially the "novice" level friends who don't understand the speakers, can only look at the appearance, listen to the business to put a small piece of deafening music, can only feel the senses; as far as technical indicators are concerned, I don't know where to go from Start by judging the pros and cons of the speakers. This article briefly introduces the relevant performance indicators of the speakers, I hope that these contents can give you some reference when purchasing speakers.

Speaker technical indicators: sound technology hardware 3D sound technology is now more common SRS, APX, Q-SOUND and Virtaul Dolby, etc., although they each achieve different methods, but can make people feel the obvious three-dimensional effect, which The first one is the most common. They all use the extended stereo (Extended Stereo) theory, which is to add additional processing to the sound signal through the circuit, so that the listener feels the sound direction extended to the outside of the two speakers, so as to expand the sound, giving people a sense of space and A three-dimensional effect produces a wider stereo effect. In addition, there are two sound enhancement technologies: active electromechanical servo technology and BBE high-definition plateau sound reproduction system technology, which also have certain effects on improving sound quality.

Speaker technical indicators: Frequency response range The full name of the frequency response range is called frequency range and frequency response. The former refers to the range between the minimum effective playback frequency of the speaker system and the highest effective playback frequency; the latter refers to the sound pressure generated by the speaker as a function of frequency when an audio signal outputted with a constant voltage is connected to the system. Increasing or attenuating, the phase changes with frequency. The relationship between the sound pressure and phase and frequency is called the frequency response in dB (dB). The curves of sound pressure and phase lag with frequency are called "amplitude frequency characteristics" and "phase frequency characteristics", respectively, and are collectively called "frequency characteristics". This is an important indicator to check the performance of the speaker. It has a direct relationship with the performance and price of the speaker. The smaller the decibel value, the flatter the frequency response curve, the smaller the distortion and the higher the performance. Such as: a speaker frequency response is 60Hz ~ 18kHz +/- 3dB. These two concepts are sometimes indistinguishable and are called frequency response. In theory, the harmonic components that make up the sound are very complicated. The wider the frequency range, the better the sound is, but this is basically correct for medium and low-end multimedia speakers. Nowadays, the speaker manufacturers generally have too large a range of system frequency response. The high frequency part is not a lot worse, but it is extremely unrealistic on the low end. Therefore, we must pay attention to the low frequency sound. Don’t believe it. The value on the leaflet.

Speaker Specifications: Sensitivity This indicator is the sound pressure level measured one inch ahead of the center axis of the speaker's horn when a 1W/1kHz signal is input to the speaker input. The unit of sensitivity is in decibels (dB). The sensitivity of the speaker is 3dB, the sound pressure of the output is doubled. The sensitivity of the ordinary speaker is in the range of 85~90dB, the low sensitivity is below 85dB, the sensitivity is above 90dB, and the sensitivity of the multimedia speaker is slightly lower.

Speaker technical indicators: The power indicator of the power speaker is very confusing. Simply put, power is the amount of power that a speaker can make. According to international standards, power is marked in two ways: rated power and maximum withstand power (instantaneous power or peak power PMPO). The rated power refers to the continuous analog signal of the specified waveform in the rated frequency range, the maximum undistorted power that the speaker can emit, and the maximum withstand power is the maximum electric power of the speaker without any damage. Usually, in order to cater to the consumer's psychology, the music usually has a large power rating, so the rated power should be taken when purchasing the multimedia speaker. The maximum power consumption of the speaker is mainly determined by the power of the power amplifier chip, and also has a great relationship with the power transformer. The weight difference between the main and sub-speakers can be roughly known about the weight of the transformer. Generally, the heavier the power, the greater the power. But the power of the speaker is not the bigger the better, the application is the best, for the average home user's room of about 20 square meters, the true sense of 50W power is enough, there is no need to go too far to pursue high power.

Speaker technical indicators: Distortion speaker distortion definition is basically the same as the amplifier's distortion, the difference is that the amplifier input is the electrical signal, the output is still the electrical signal, and the speaker input is the electrical signal, the output is the acoustic signal. Therefore, the distortion of the speaker refers to the distortion of the electroacoustic signal conversion. The distortion of the sound wave is allowed to be within 10%, and the human ear is generally insensitive to distortion within 5%. It is best not to buy speakers with a distortion of more than 5%.

Speaker technical indicators: signal to noise ratio This indicator refers to the ratio of the normal sound signal and the noise signal played back by the speaker. The signal-to-noise ratio is low, the noise is severe when the small signal is input, and the sound in the entire range is obviously murky. I don't know what sound is emitted, which seriously affects the sound quality. Speakers with a signal-to-noise ratio below 80 dB (including subwoofers below 60 dB) are not recommended.

Speaker Specifications: Impedance This indicator refers to the ratio of the voltage to current of the input signal. The input impedance of the speaker is generally divided into high impedance and low impedance. Generally, the impedance is higher than 16 ohms, the impedance is lower than 8 ohms, and the standard impedance of the speaker is 8 ohms. The nominal impedance of the speakers on the market is 4 ohms, 5 ohms, 6 ohms, 8 ohms, 16 ohms, etc. Although this indicator has nothing to do with the performance of the speakers, it is best not to buy low-impedance speakers. The recommended value is standard. 8 ohms, because the low-impedance speaker can get a large output power when the power amplifier and output power are the same, but the impedance is too low, which will cause under-damping and bass degradation.

For the Curved Led Screen, if you use the traditional horizontal led module that can take a lot of  problems such as large seams, the Curved LED screen screen cabinet body arc is not smooth, cannot adapt to large arc situations. Therefore, in order to ensure that, we would like to use the vertical led module to achieve better smoothness on the surface, and easy to assembly into a large arc curved Led Screen.

curved led screen

Curved LED screen

Curved Led Screen,Arc-Shaped Led Display,Rental Led Display Screen,Curved Led Display Screen

Shenzhen Cxcolor Optoelectronics Co., LTD. , http://www.largeledscreen.com

This entry was posted in on