The air in the air shower channel passes through the primary effect filter into the static pressure box by the fan. After being filtered by the high efficiency air filter, the clean air is ejected from the nozzle of the air shower channel at a high speed. The nozzle angle can be adjusted and can be effectively blown. In addition to the dust attached to the surface of people's special or carrying items, the dust that is blown off is recycled back into the primary air filter. This cycle can achieve the purpose of air shower.
When the air shower does not automatically sense the air shower, it is necessary to check the light-sensing system in the lower right corner of the air shower room to see if the light-sensing installation can be installed correctly, just as the light senses on both sides are relative and the light sense is normal, which is automatic Induction shower.
When the air shower fan is reversed or the wind speed of the shower is very small, it is necessary to check whether the 400V three-phase four-wire line can be reversed. Check whether the initial and high-efficiency filter of the air shower can cause excessive dust accumulation. The industrial equipment is There will certainly be some problems in the operation of the project, which is the problem of its own operation, or the quality of the air shower itself, the former is able to negotiate with the air shower manufacturers to deal with the latter if the warranty to let the air shower Manufacturers free on-site maintenance and treatment, but also find the reasons for the relevant issues