Finnish company OptoGaN acquired by Onexim for LED lighting joint venture

The JV is targeted at creating a production company in Russia for next generation lighting based on GaN semiconductor chips. OptoGaN, a supplier of high brightness LEDs based in Espoo, Finland, was acquired earlier this month by Onexim, a Russian financial group.
OptoGaN's Finnish and German operations have become part of the OptoGaN Group, a joint venture established by Onexim, the Russian Corporation of Nanotechnologies (RUSNANO), and the Ural Optical and Mechanical Plant (UOMP). The JV was officially approved by the three Customers during The Nanotechnology Forum in Moscow in early December.
According to Onexim and RUSNANO, the JV is aim at creating a production company in Russia for next generation lighting based on GaN semiconductor chips. Products will include LED chips, lamps, and lighting systems.
Industrial production of GaN chips will be done within the special economic zone in St. Petersburg, Russia, while the assembly of LED lamps and lighting systems will be performed in Yekaterinburg, Russia, at newly built production facilities next to UOMP.
OptoGaN's management considers the deal a significant step towards commercializing its gallium nitride (GaN) technology and establishing itself as a mass production LED company. Its chip production technology was created by Vladislav Bougrov and Maxim Odnoblyudov, who founded the company in late 2004.

Hemeixin PCB is a thermally superior printed circuit board technology that will reduce the LED junction temperature with its 200+ W/m.k thermal conductivity and is an alternative technology to the conventional Aluminum PCB or MCPCB with 2to5 W/m.k.

Thermal Interface PCB


Dear value customer:
Thanks very much for trust and interesting.
Here is a basic checklist of information needed to provide a quote. Please make sure you have indicated:

  • A part number (including revision number) for your design to ease tracking
  • Your deadline for order shipment, known as turnaround (short turnaround increases cost)
  • The quantity of boards required
  • Board thickness (.062 inches, .032 inches, .093 inches). .062 inches is standard
  • Type of board material (FR4, high-temp FR4, Rogers, Teflon, etc). FR4 is standard
  • Number of layers
  • Surface finish (SMOBC, HAL, immersion gold, etc). SMOBC and HAL are standard
  • The color for solder mask and component overlay. Green is standard
  • Copper weight on outer layer (1 oz., 2 oz., etc). 1 oz. is standard
  • Copper weight on inner layers (.5 oz., 1 oz.). Either is standard
  • The minimum trace and space widths in your design
  • Indicate your board dimensions on a mechanical layer
  • Do you want your boards to remain panelized, or supplied individually cut?


Thermal Interface PCB

Led Cooling PCB,Heat Sink PCB,Led Thermal PCB

Hemeixin Electronics Co.,Ltd. , http://www.rigidflex-pcb.com

This entry was posted in on