Cement mortar anti-folding test machine "liquid crystal interface operation method" - Database & Sql Blog Articles

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Single chip microcomputer STM32L151CCU6

Test - lowercase jpg

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Kaixin micro test

The cement mortar anti-folding test machine is used for the determination of the flexural strength of cement or other non-metallic brittle materials test blocks, mechanical loading fully automatic, electronic force measurement. Product compliance

GB/T17671, GB3350, BS4550, ISO679 standard requirements.

LCD main interface description

1

)

Standby state: At this time, the instrument cantilever is in a stationary state;

2)

Test status: At this time, the instrument is testing the performance of the sample according to the test plan you set;

3)

Quickly adjust the state of the cantilever arm: When the instrument is in the standby state, if the user clicks the [fast up] button in the keyboard area, the icon appears in the status display area. When the [fast up] button is clicked again, the instrument stops the fast uplink. Thereby entering the standby state;

4)

Quickly adjust the state of the cantilever arm: When the instrument is in the standby state, if the user clicks the [fast down] button in the keyboard area, the icon appears in the status display area. When the [fast down] button is clicked again, the instrument stops rapidly descending. Thereby entering the standby state;

5)

Move the arm to the micro speed up adjustment state: When the instrument is in the standby state, if the user clicks the [micro speed up] button in the keyboard area, the icon appears in the status display area. When the [micro speed up] button is clicked again, the instrument stops the micro speed up. Thereby entering the standby state;

6)

When the instrument is in the standby state, if the user clicks the [Micro Speed ​​Down] button in the keyboard area, the icon appears in the status display area. When the [Micro Speed ​​Down] button is clicked again, the instrument stops the micro speed down. Thereby entering the standby state.