Installation process 1 Mobile phone installation Sofa butler mobile phone → 2 Mobile phone and TV are connected by the same router → 3 mobile phone push installation → 4 Installation is successful
Steps
1. Use your Android phone to download and install the sofa butler mobile version: http://pub.shafa.com/download/shafa_mobile.apk;
The 2. Run the sofa butler mobile version on the mobile phone;
The 3, the need for mobile phones and the need to install the sofa butler of the TV (or box) in the same LAN (for example, mobile phones and televisions use the same home Wi-Fi); sofa butler mobile phone version of the page select "install the sofa butler";
The 4. For other equipment than the Xiaomi brand, please select "other brand equipment installation";
5, find the IP corresponding TV (or box), and click on the connection; [If you do not show the corresponding device, click the connection fails, sofa butler phone version shows "find the device", please wait a moment]
The 6. After clicking the connection button, the installation package will be automatically sent to the TV for installation. The installation process may take a few minutes. Please wait patiently.
The 7, mobile phone screen as shown in the figure, indicating that the installation has been successful.
The It may take a long time for the sofa butler mobile version to connect to the TV. Please try to connect several times.
It may take a long time for the sofa butler mobile version to connect to the TV. Please try to connect several times. If you still cannot connect successfully, your TV needs to be set. Please turn on the settings as follows:
First, enter the factory mode to find the local information, in the interface of the local information, use the remote control to input "up, down, left, right, or left and right" in order to open the factory menu.
Second, open ADB
For example, Skyworth E660E: After entering the factory menu - select the common switch - ADB is set to "on", the interface is as follows:
The The above is the interface of the Skyworth E660E model. The interface of each model is slightly different.
How to open each model:
42K1, 42K1T, 42K1Y, 42K1TY, 55K1, 55K1T:
- The ADB switch can be turned on in the advanced settings of the factory menu, and the password "123456" can be entered.
40K1Y, 49K1Y, 49K1C:
- There is an "Adbd Enable" in the other settings of the factory menu. Change the following parameter to 1.
The 40U1, 58U1:
- There are no ADB-related options in the factory menu, but it is said that the firmware will automatically open after upgrading to February 2014.
Note: After the ADB switch is turned on, some devices may need to be powered off to restart.
Watch on-demand video on smart TVs, recommend using a TV cat, watching live TV, and recommending live HDP; more interesting content, please use Tencent video TV version, Youku video TV version, etc.; Fun smart TV and box, more exciting Content is on the sofa butler.
Cut Out Fuse is a combination of a fuse and a switch, it`s voltage is up to 11kv-33kv, which is made of porcelain, polymer or steel. When the current exceed the specified value, Drop Out Fuse ( Polymer Cut Out Fuse and Porcelain Cut Out Fuse ) will produce heat and disconnect. Arrester is made of porcelain or polymer. The voltage is 11kv-33kv. it is a device used on electrical power systems to protect the insulation and conductors of the system from the damaging effects of lightning.
In electrical distribution, a fuse cutout or cut-out fuse is a combination of a fuse and a switch, used in primary overhead feeder lines and taps to protect distribution transformers from current surges and overloads. we make available these fuses in varied specifications to meet the clients' different preferences in an efficient manner.
China Cut Out Fuse,Polymer Cut Out Fuse supplier & manufacturer, offer low price, high quality Drop Out Fuse, 10 Amp Fuse , etc.
Features
1. Reliable operations2. Rugged construction
3. Longer service life
A lightning arrester is a device used on electrical power systems and tele communications systems to protect the insulation and conductors of the system from the damaging effects of lightning. With these products manufactured as per latest technology standards, these are able to deliver optimum functionality in given application areas.
Features
1.Good hydrophobic nature2.Superior external insulation property
3.Ozone Resistance
4.Good mechanical performance and anti-ageing
5.Assurring best overall protection for transmission and transformation equipment
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Cut Out Fuse,Polymer Cut Out Fuse,Drop Out Fuse,10 Amp Fuse
FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com