Possibility analysis:
This is very normal
1) 5050 lamp bead is higher than PCB
2) After filling the PU glue, the glue fills the space around the lamp bead and is higher than the highest surface of the lamp bead.
3) The light is transmitted to the surroundings, and there is a bracket at the bottom, so that it is blocked and becomes a dark area plus the refraction and reflection of light, so that the aperture is generated.
This problem will occur if you want to pour PU glue on the lamp beads. If there is no glue, there will be this phenomenon is not so obvious.
Analysis of the Causes of LED Dead Lights
Guide: We often encounter LEDs that are not bright. Package companies, application companies, and the units and individuals that use them are likely to come across. This is the phenomenon of dead lights in the industry. The reason is nothing more than two cases: First, the LED leakage current is too large, causing the PN junction to fail, so that the LED light does not light up, this situation generally does not affect the work of other LED lights; Second, LED lights Internal connection lead disconnected
Keyword LEDLED package
We often encounter LEDs that don't shine. Package companies, application companies, and the units and individuals that use them are likely to come across. This is the phenomenon of dead lights in the industry. The reason is nothing more than two cases: First, the LED leakage current is too large, causing the PN junction to fail, so that the LED light is not bright, this situation generally does not affect the work of other LED lights;
Second, the internal connection lead of the LED lamp is disconnected, causing no current to pass through the LED and generating a dead light. This situation will affect the normal operation of other LED lights, because the working voltage of the LED lamp is low (red, yellow and orange LED working voltage is 1.8) V-2.2V, blue-green-white LED working voltage 2.8-3.2V), generally need to be connected in series and parallel to adapt to different working voltages. The more LED lights in series, the greater the impact, as long as there is one LED light. The internal connection is open, which will cause the entire string of LEDs in the series circuit to be off. This situation is much more serious than the first case. LED dead lights are the key to affect product quality and reliability. How to reduce and eliminate dead lights and improve product quality and reliability is a key issue for packaging and application companies.
Here are some analysis of some of the causes of the dead lights:
1. damage caused by static electricity to the LED chip, the LED chip PN junction failure, leakage current increases, the resistance becomes a static devil is a great harm, because the world countless electrostatic damage to electronic components, resulting Tens of millions of dollars in economic losses. Therefore, it is an important task in the electronics industry to prevent static electricity from damaging electronic components. LED packaging and application companies should not be taken lightly. Any problem in one link will cause damage to the LED, making the LED performance deteriorate or even fail. We know that the human body (ESD) static electricity can reach about three kilovolts, which can damage the LED chip. In the LED packaging production line, the grounding resistance of all kinds of equipment meets the requirements. This is also very important. Generally, the grounding resistance is 4 Ohm, in some cases where the requirements are high, the grounding resistance should even reach ≤ 2 ohms. These requirements are
For those familiar with the electronics industry, Guan Jian is in place when it is actually implemented, and whether there is a record. According to the author's understanding of the general private enterprise, the anti-static measures are not in place. This is the test record that most enterprises can't find the grounding resistance. Even if the grounding resistance test is done once a year, or once a few years, or there is a problem. When checking the grounding resistance, it is a very important task to test the grounding resistance test. At least 4 times a year (tested every quarter), some places with high requirements should be grounded once a month. The soil resistance will vary with the seasons. There are many rains in spring and summer, and the soil wet grounding resistance is easy to reach. In autumn and winter, the soil moisture is less, and the grounding resistance may exceed the specified value. The record is to preserve the original data. It will be well documented in the future. Comply with ISO2000 quality management system. The test grounding resistance can be designed by itself. The grounding resistance test packaging enterprise and the LED application enterprise must do it. Just fill in the various device names in the table and measure the grounding resistance of each device. The tester's signature can be archived.
The human body static electricity is also very harmful to the LED. It should be worn with anti-static clothing when working. It should be equipped with an electrostatic ring. The electrostatic ring should be well grounded. There is an antistatic effect that does not need to be grounded. The antistatic effect is not good. It is recommended not to use the belt. This kind of product, if the staff violates the operating procedures, should receive corresponding warning education, and also play a role in notifying others. The amount of static electricity in the human body is related to the different fabrics worn by people and the physique of each person. It is easy to see the discharge between clothes in autumn and winter nights. The voltage of this electrostatic discharge is three thousand volts. . The ECD value of the silicon carbide substrate chip is only 1100 volts, and the ESD value of the sapphire substrate chip is lower, only 500-600 volts. A good chip or LED, if we take it by hand (the body does not take any protective measures), the result can be imagined, the chip or LED will be damaged to varying degrees, sometimes a good device passes our hands It is inexplicably broken, this is the fault of static electricity. If the packaging company does not strictly follow the grounding procedures, the company will suffer losses, which will result in a decline in the product qualification rate and reduce the economic benefits of the enterprise. If the equipment and personnel are also poorly grounded, the LED will be damaged. It is inevitable. According to the requirements of the LED standard manual, the lead wire of the LED should be no less than 3-5 mm, and be bent or soldered, but most application companies do not do this, but only the thickness of a PCB board (≤ 2 mm) is directly soldered, which will also cause damage or damage to the LED, because too high soldering temperature will affect the chip, which will deteriorate the chip characteristics, reduce the luminous efficiency, and even damage the LED. This phenomenon is not uncommon.
Some small enterprises use manual soldering, using 40 watt ordinary soldering iron, the soldering temperature can not be controlled, the soldering iron temperature is above 300-400 °C, too high soldering temperature will also cause dead light, LED lead expansion coefficient at high temperature is about 150 °C The expansion coefficient is several times higher, and the internal gold wire solder joint will open the solder joint due to excessive thermal expansion and contraction, resulting in a dead light phenomenon. 2. Analysis of the cause of dead light caused by the opening of the internal connection of the LED lamp
2.1 The packaging company's production process is not complete, and the incoming inspection method is backward, which is the direct cause of the LED dead light.
Generally, LEDs are packaged in brackets. The brackets are made of copper or iron metal materials and precision stamped. Due to the high cost of copper, the cost is naturally high. Due to the fierce competition in the market, in order to reduce manufacturing costs, most of the market The cold-rolled low-carbon steel is used to stamp the LED brackets. The iron brackets are silver-plated, and the silver plating has two functions. One is to prevent oxidation and rust, and the other is to facilitate welding. The plating quality of the brackets is very important. It is related to the life of LED. The treatment before electroplating should be carried out strictly according to the operating procedures. The procedures of derusting, degreasing and phosphating should be meticulous. The current should be controlled during electroplating. The thickness of the silver plating layer should be controlled well. Thick and high cost, too thin to affect quality. Because the general LED packaging companies do not have the ability to check the plating quality of the bracket row, this gives some electroplating companies the opportunity to make the plating of the plated silver plate thinner and reduce the cost. The general packaging enterprise IQC is on the bracket row. The inspection method is lacking, and there is no instrument for detecting the thickness and fastness of the plating layer of the stent, so it is easier to get away with it. I have seen some stents rust in the warehouse after a few months, not to mention the use, it can be seen how poor the quality of plating. The products made with such brackets are definitely not used for a long time. Do not say 30,000 to 50,000 hours, and 10,000 hours are a problem. The reason is very simple. There is a period of time in the south wind days. This kind of weather has a large humidity in the air, which is easy to cause the electroplating of the metal parts with poor plating, which makes the LED components ineffective. Even if the packaged LED is too thin due to the silver plating layer, the adhesion is not strong, and the solder joint is separated from the bracket, causing a dead light phenomenon. This is the well-used lamp that we encountered is not bright, in fact, the internal solder joint is separated from the bracket.
2.2 Every process in the packaging process must be carefully operated. Any negligence of any link is the cause of the dead light. In the point, the solid crystal process, silver glue (for single solder chip) is much less and less, more glue Will return to the chip gold pad, causing a short circuit, less chip and not sticky. The double-solder chip is also the same as the point-insulating glue. When the point is too much, the insulating glue will return to the gold pad of the chip, causing the solder joint to cause a dead light. The point is less sticky and the stick is not strong, so the dispensing must be just right, neither too much nor too little. The welding process is also critical. The four parameters of the pressure, time, temperature and power of the gold ball welder should be just right. In addition to the fixed time, the other three parameters are adjustable. The pressure should be adjusted moderately and the pressure is high. It is easy to crush the chip. If it is too small, it is easy to solder. The welding temperature is generally adjusted at 280 °C. The adjustment of the power refers to the adjustment of the ultrasonic power. It is too big or too small to be good. To be moderate, in short, the adjustment of the parameters of the gold wire ball welder is good. The material is ≥6g by the spring torque tester, which is qualified. Every year, the parameters of the gold ball welder are tested and corrected to ensure that the welding parameters are in the best condition. In addition, the arc of the welding wire is also required. The arc height of the single soldering chip is 1.5-2 chip thickness, and the arc height of the double soldering chip is 2-3 chip thickness. The height of the arc also causes the quality of the LED, and the arc height is high. Too low is likely to cause a dead light phenomenon during welding. If the arc height is too large, the current impact resistance is poor.
3. Method for identifying dead soldering dead lights
Use the lighter to heat the LED lead to 200-300 °C, remove the lighter, and connect the LED with the positive and negative electrodes with a 3 volt button battery. If the LED light can be lit at this time, but the lead temperature is lowered. The LED light changes from bright to off, which proves that the LED light is a virtual solder. The reason why the heating can be lit is to use the principle of thermal expansion and contraction of the metal. When the LED lead is heated, the expansion elongation is connected to the internal solder joint. When the power is turned on, the LED can normally emit light, and the LED lead shrinks with the temperature drop. Return to the normal temperature state, disconnected from the internal solder joints, the LED light will not light up, this method is tried and tested. The two soldered dead lights are soldered to a metal strip, soaked with concentrated sulfuric acid to dissolve the external colloid of the LED, and the colloid is completely dissolved and taken out, and the soldering of each solder joint is observed under a magnifying glass or a microscope. It is possible to find out whether it is a welding or a second welding problem. It is the parameter setting of the gold ball ball welder, or other reasons, in order to improve the method and process to prevent the phenomenon of the virtual welding from happening again.
Users who use LED products will also encounter the phenomenon of dead lights. This is the phenomenon of dead lights after using LED products for a period of time. There are two reasons for dead lights. Open circuit dead lights are poor quality of soldering or quality of bracket plating. There is a problem, the LED chip leakage current will also cause the LED light to not light. Nowadays, many LED products do not have antistatic protection in order to reduce the cost, so it is easy to cause damage to the chip by induced static electricity. Thundering in rainy days is prone to high-voltage static electricity on the power supply line, and the spikes on the power supply line will cause LED products to suffer different degrees of damage. In short, there are many reasons for the death of lights. It is impossible to enumerate them. From the aspects of packaging, application, and use, there may be dead lights. How to improve the quality of LED products is a high priority and serious research for packaging companies and application companies. The problem, from chip, bracket selection, to LED packaging, the entire process must be operated in accordance with the ISO2000 quality system. Only in this way, the quality of LED products can be comprehensively improved, in order to achieve long life and high reliability. In the application circuit design, the selection of varistor and PPTC components to improve the protection circuit, increase the number of parallel circuits, the use of constant current switching power supply, the addition of temperature protection are effective measures to improve the reliability of LED products. As long as the packaging and application enterprises operate in strict accordance with the ISO2000 quality system, the quality of LED products will definitely reach a new level.
Led Flood Light is a good
choice for outdoor lighting whether for industrial or commercial lighting, such
as factories, construction sites, parking lots, stadiums, shopping malls, etc.
You can even put a low-power floodlight outside your home.
Safety Flood Light. It will bring you a bright night under the lighting of our
durable, energy efficient and safety floodlight.
Power of flood light could be various, from 3watt to 1000watt. Good design with
qualified quality makes your project work perfectly.
Led Flood Light,Flood Light,Led Flood Light Outdoor,Led Flood Light 200W
ZHONGSHAN G-LIGHTS LIGHTING CO., LTD. , https://www.glightsled.com