V2X application analysis necessary for driverless technology

V2X is an important application of the Internet of Things in the driving situation of vehicles. Security protection is the main application at this stage.

V2X brings the eyes of the super-distance, which is an important part of the necessary technology for automatic driving and intelligent transportation. V2X is a general name for V2V (VehicletoVehicle car communication), V2I (VehicletoInstrucTIon car communication), V2P (VehicletoPedestrian), etc. V2X can obtain a series of traffic information such as real-time road conditions, road information, pedestrian information, etc., thus bringing long-distance environmental signals. .

Bottom: V2X connects cars to cars, cars and roads, cars and people

Active safety: With the V2X car network, the vehicle can acquire the unknown parameters of the surrounding environment and the running status of nearby vehicles. Then the vehicle-side active safety algorithm will process the acquired information and classify the information according to the priority, which may cause danger. The situation is pre-warned, and in the emergency situation, the vehicle's execution end can be used to control the vehicle to avoid risks.

Below: Highway danger warning

Over-distance video transmission: By installing a camera in the pedestrian gathering area, the road test node is sent out to the vehicle node to remind the passing vehicle. In this way, the driver knows the situation ahead as early as possible in the area where the driver is close to the accident, and adopts the appropriate speed to improve the travel safety.

Below: Over-the-distance video transmission

Traffic signal transmission: At present, the driver can only obtain the traffic sign by visual inspection, which not only increases the burden on the driver, but also causes a traffic accident or traffic violation due to the short interval between the identification of the indicator and the action taken. With the V2X car network, commands such as road speed limit, limit line, and signal lights can be transmitted to the vehicle terminal. The vehicle terminal can remind the driver according to the information or assist the driver through the execution end.

Below: Traffic signal transmission

Improve driving safety & reduce operating costs, commercial vehicles have a higher demand for V2X car networking than passenger cars

Commercial vehicles not only need to improve the safety of driving, but also need to balance operational efficiency. V2X technology can be used as an ADAS function module to reduce the accident rate of commercial vehicles. It can also build intelligent fleets, build formations, plan routes, reduce fuel consumption and improve operational efficiency. At present, German companies have carried out commercial vehicle V2X experiments with satisfactory results.

Below: V2X car networking is used in the construction of smart teams


KNL4-100 Residual Current Circuit Breaker

KNL4-100 Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.

Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .

KNL4-100 Molded Case Circuit Breaker,KNL4-100 Small Size Molded Case Circuit Breaker,KNL4-100 Electrical Molded Case Circuit Breaker,KNL4-100 Automatic Molded Case Circuit Breaker

Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmoldedcasecircuitbreaker.com

This entry was posted in on