The mobile phone market tends to be saturated, which makes the products enter a fast iteration period and become a fast-moving consumer goods. All major terminal brand manufacturers are struggling to find new screaming innovations and stimulate users to pay.
In the past two years, the new darling of the dual-camera and curved-faced brand manufacturers, the former has the Xiaomi MIX comprehensive screen and the Samsung S8/S8 Plus hyperboloid full-screen, the latter has Huawei and OPPO two giant layout. In addition to the 3D Touch pressure-sensitive screen technology, the Apple iPhone 7/7 Plus adds a pressure touch function to the Home button, adding a different color to the market. However, this obviously did not meet expectations and set off a new round of national frenzy.
Perhaps the road to micro-innovation for mobile phone hardware is coming to an end. The new technology will bring a disruptive operating experience and comprehensively innovate human-computer interaction will be a new direction, just as Steve Jobs ended the era of Nokia's hegemony with a generation of iPhone.
CITE2017 The 5th China Electronic Information Expo In the same period, 2017 mobile phone 3D touch display black technology summit, the general manager of the core technology MCU business unit Xie Yibo brought the "human-computer interaction revolution - pressure touch technology" keynote speech Explained in detail.
Photo: Xie Yibo, General Manager of Core Technology MCU Business Unit
Pressure touch, eliminate all mobile phone buttons!In Xie Yibo's view, 3D curved surface full screen + zero mechanical button will trigger a new round of adrenaline excitement for consumers, which redefines the human-computer interaction experience while improving the appearance of the mobile phone, such as sliding the side to achieve one-handed Operate, adjust the volume, lightly hold the phone to wake up, and enhance the waterproofness of the whole machine.
It is rumored that the iPhone 8 will use the full body sensing, while optimizing the Touch ID technology, the user fingerprint can be recognized by displaying the touch screen, in place of the Home button.
Figure: The new generation of iPhone 8 will adopt full screen and no mechanical buttons
However, in the process of achieving this wonderful goal, how to make the interaction more reliable and stable is a problem that must be solved. Xie Yibo said that in the past 14 years, Xinhai Technology has been focusing on the research and development of pressure detection signal chips, as well as the continuous innovation of solutions and algorithms. The company's R&D staff is over 70%, and has a number of technical patents. It also has its own unique advantages in the field of pressure touch. .
The core mechanical key pressure control solution of Core Technology supports the hidden pressure sensitive Home button + side hidden pressure sensitive button. The principle is to stick the flexible pressure sensor under the back plate when the pressure sensor detects a slight deformation. (Support for detecting the minimum deformation of 1μm) will output a voltage signal, and the core touch panel of the Force Touch (the 3D Touch) SOC chip will convert it into a pressure value and upload it to the AP layer of the mobile phone through the communication interface, thus generating functional feedback. To achieve the transformation of the interactive experience.
Figure: The technical principle of the core sea technology pressure touch solution
Core Sea Technology's pressure touch solution has four advantages, one is cost-effective, high sensitivity, high linearity; the other is deep integration of sensors, 3D Touch chip architecture and algorithms to achieve ultra-low power of the system The third is the deep integration of hardware and software to achieve high reliability; the fourth is easy to assemble, just press the pressure module under the glass to perform deformation identification.
In fact, the pressure touch technology of Xinhai Technology has already been verified on smart home appliances, such as smart range hoods. With the pressure touch panel material changing from glass to stainless steel and aluminum alloy, the traditional capacitive pressure The touch can't be used, and Core's pressure touch solution solves this problem well. It can be used to identify any material such as glass and metal. It can be applied to the mobile phone. In addition to the full screen of 3D surface, it also supports straight face + The metal side touch operation makes it easier for brand manufacturers to design products more flexibly.
Figure: HTC Ocean network transmission concept map is based on metal side pressure touch
However, it should be noted that the possibility of misoperation of the edge pressure is very large, which requires an algorithm to solve. At present, Core Technology is conducting in-depth research on sensors, 3D Touch SOC architecture and application scenarios, and hopes to continuously optimize Algorithm to improve reliability.
The screen screen pressure touch completes the interactive supplement, and the game application will welcome the new explosion point.In addition, Core Technology will also introduce a 3D curved screen pressure touch solution. Xie Wei waveform example, the two-dimensional touch screen is equivalent to the left button of the mouse, and the screen pressure touch realizes the right-click menu function, and completes the interactive supplement.
"When Apple first introduced 3D Touch technology, there was a short-lived app for the development of the technology. In the future, pressure touch will help the game-like APP to open the third-dimensional operation - gravity sensing, which will be very interesting. The application is worth looking forward to."
Figure: Core Technology 3D curved screen pressure touch solution
This scratch-resistant TPU Film protects your new AirTag from daily wear and tear. It can be easily glued to the back to keep the shiny silver in its original condition. In addition, the AirTag screen protector with "self-healing" function can automatically repair small scratches and bubbles within 24 hours. This means you can continuously enjoy the new look and appearance of AirTag without worrying about serious scratches and dents.
The Apple Airtag TPU Film can perfectly fit your AirTag skin. It is designed to provide the maximum coverage for your AirTag metal panels. Compatible with most AirTag shells. Leave extra space around the frame so that your shell can wrap the edges of the AirTag without interfering with the film.
The 0.14mm ultra-thin AirTag Screen Protector allows you to enjoy the maximum resolution while being thin enough to make the AirTag sensitive to the original signal response, ensuring that it will not affect any user experience. You won't even notice that the screen protector is there, so your Apple logo can still be displayed.
The AirTag Tracker Screen Protector is very easy to apply and is specially designed for your AirTag. Just clean your AirTag and install it on the surface to eliminate all bubbles and get the job done!
Apple Airtag Screen Protector, Apple Airtag Screen Protective Film, Apple Airtag TPU Film, AirTag Tracker Screen Protector, Skin Wrap
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtbackskin.com