There will be problems with the big bricks falling again. Unfortunately, the big bricks from P8MAX fell.
Symptom: The rear camera is unable to focus Turn on the camera with endless focus Focus Blur
Lesion: Rear camera
Solution: Replace the rear camera module
Operation date: April 27, 2017
Tools: hot melt glue guns, small Phillips screwdrivers for dismantling, small hex screwdrivers, suction cups, blades, tweezers (nails), hot air guns (hair dryers or big suns, time issues).
First to an exploded view
The hot melt adhesive first hits one end of the black protective strip, after solidification it is inserted by hand to slowly insert the blade and expose 4 screws. (The operation did not shoot, borrow a network "removal mad" map, here are the small hexagonal screws, since the beginning of the fuselage are small cross screws), the Internet also has a direct 3M double-sided tape, the blade cut open, method Many, careful to start.
Decompose the screen and motherboard connection, find the lesion, the camera section in the upper right corner. (At a glance after unpacking, use the suction cup to pull up from the side that does not have a button and then slowly open it.)
Slowly lift up, here there are two pads are fixed with screws, one by one, you can expose the camera plug.
Here's a note that some gray tape is firm and can be hung slowly with a tweezers.
Contrast between old and new cameras (accessories source: XBao, p8, p8max, Maiman 4 universal)
Reverse installation testing, perfect.
