Water heater development experienced three technological revolutions, and the third revolution was the most deeply rooted.
Early water heaters were not well-structured, and safety accidents such as electric leakage and gas leakage (gas and electric water heaters) occurred from time to time, which led to the first security revolution. In the 21st century, the water volume and water temperature of water heaters have also become the focus of consumers' attacks. This has led to the second comfort revolution. Constant temperature water heaters and large-flow water heaters have gradually taken over the mainstream of the market. Today, house prices and prices have gone up. The average consumer has been forced by the pressure of life and the cost of living has also become a reasonable choice. The concept of energy saving, environmental protection, green, and low carbon, through the guidance of national policies and mainstream media, has gradually established a solid foundation on the consumer level, and has also become a proposition for consumers to consider when purchasing water heaters. This is the first issue for water heaters. The source of three energy-saving revolutions.
With the consumer base, the technological revolution in energy saving water heaters has been vigorously launched. However, under such circumstances, many companies (mainly air-energy water heater companies) use their over-packaging or concocting concepts and pile up data to demonstrate their own energy-saving technologies, which brings great difficulties to consumers' judgments.
Some air energy companies advertise their brand influence through advertising communication and roadshows. Some companies continue to pack their own technical indicators in the dissemination, including different energy efficiency ratios (up to 6 or even 8). Some companies are even more aggressive in attacking water heaters of other categories (including gas, electricity, and even solar energy) and highlighting their own energy-saving levels through data comparisons to attract consumers' attention and purchase of their products.
Experts in home appliances and new energy industries, well-known brand planners, and Mr. Bo Feng, CEO of Shanghai Best Strategy Brand Marketing and Planning Agency, were very surprised and disappointed. He believes that whether or not to consider whether a water heater is energy-efficient is not only about which energy to use. Or technical principles, but also depends on this product's raw materials, production process, design, design philosophy, continuous energy-saving effects and other factors.
According to Mr. Bo Feng’s point of view, air can directly advertise itself as an energy-saving water heater.
Therefore, if consumers want to find a real energy-saving water heater, they must also go through a variety of comparisons, rather than just listening to the corporate side.
In addition to the current market, in addition to the air to water heaters, the instant electric water heaters have gradually emerged. Even though the thermal type was once considered to be a very energy-consuming product (with higher rated power), under the leadership of the technology-based company BAK, the hot-type electric water heater gradually embarked on a regular basis, and demonstrated its own energy-saving in an all-round way. Fundamentals, this point can be compared with the air energy water heater can be clearly reflected. The thermal energy saving is mainly reflected in three points:
Space energy saving: Air energy water heater has a huge water tank (up to 200L or more) and it occupies space. General urban homes are very difficult to install. Instant electric water heaters, on the other hand, are small in size and can easily be installed in small bedrooms.
Energy saving of raw materials: The air energy compressors and water tanks are very large, so the raw materials used are also very large (including copper, aluminum and other metals), and the production process consumes more energy. Because of the small size of the thermal type, the materials used are also relatively small. Therefore, from the viewpoint of production energy efficiency, the thermal type is much higher than the air energy.
Use of energy-saving process: air can not be directly activated in the winter when the temperature is low, the need for electric auxiliary heating, which is also a very large energy consumption. The storage of hot water in the water tank all year round cannot be completely used cleanly, which also causes a waste of heat energy. In other words, the heat type is different. Since the current heat mode is used, how much heat is used, the heat energy reaches zero waste. Among them, BAK instant heat products also increase the heat recovery system, which effectively extracts the heat contained in the outflowing hot water and re-introduces the water pipes, thereby further reducing the rated power of the water heater itself and achieving the double energy saving effect.
It can be seen that although there are many areas where air energy can be improved in the field of energy-saving water heaters, it is difficult to achieve greater breakthroughs due to the constraints of technology and principles. If consumers want to get out of the cycle, they need such a spirit of calm exploration, from all aspects to consider, find an energy-saving water heater suitable for their own family. The instant-type electric water heater represented by BAK is bound to be able to embark on a different kind of sky in the field of energy-saving water heaters in the future.
Early water heaters were not well-structured, and safety accidents such as electric leakage and gas leakage (gas and electric water heaters) occurred from time to time, which led to the first security revolution. In the 21st century, the water volume and water temperature of water heaters have also become the focus of consumers' attacks. This has led to the second comfort revolution. Constant temperature water heaters and large-flow water heaters have gradually taken over the mainstream of the market. Today, house prices and prices have gone up. The average consumer has been forced by the pressure of life and the cost of living has also become a reasonable choice. The concept of energy saving, environmental protection, green, and low carbon, through the guidance of national policies and mainstream media, has gradually established a solid foundation on the consumer level, and has also become a proposition for consumers to consider when purchasing water heaters. This is the first issue for water heaters. The source of three energy-saving revolutions.
With the consumer base, the technological revolution in energy saving water heaters has been vigorously launched. However, under such circumstances, many companies (mainly air-energy water heater companies) use their over-packaging or concocting concepts and pile up data to demonstrate their own energy-saving technologies, which brings great difficulties to consumers' judgments.
Some air energy companies advertise their brand influence through advertising communication and roadshows. Some companies continue to pack their own technical indicators in the dissemination, including different energy efficiency ratios (up to 6 or even 8). Some companies are even more aggressive in attacking water heaters of other categories (including gas, electricity, and even solar energy) and highlighting their own energy-saving levels through data comparisons to attract consumers' attention and purchase of their products.
Experts in home appliances and new energy industries, well-known brand planners, and Mr. Bo Feng, CEO of Shanghai Best Strategy Brand Marketing and Planning Agency, were very surprised and disappointed. He believes that whether or not to consider whether a water heater is energy-efficient is not only about which energy to use. Or technical principles, but also depends on this product's raw materials, production process, design, design philosophy, continuous energy-saving effects and other factors.
According to Mr. Bo Feng’s point of view, air can directly advertise itself as an energy-saving water heater.
Therefore, if consumers want to find a real energy-saving water heater, they must also go through a variety of comparisons, rather than just listening to the corporate side.
In addition to the current market, in addition to the air to water heaters, the instant electric water heaters have gradually emerged. Even though the thermal type was once considered to be a very energy-consuming product (with higher rated power), under the leadership of the technology-based company BAK, the hot-type electric water heater gradually embarked on a regular basis, and demonstrated its own energy-saving in an all-round way. Fundamentals, this point can be compared with the air energy water heater can be clearly reflected. The thermal energy saving is mainly reflected in three points:
Space energy saving: Air energy water heater has a huge water tank (up to 200L or more) and it occupies space. General urban homes are very difficult to install. Instant electric water heaters, on the other hand, are small in size and can easily be installed in small bedrooms.
Energy saving of raw materials: The air energy compressors and water tanks are very large, so the raw materials used are also very large (including copper, aluminum and other metals), and the production process consumes more energy. Because of the small size of the thermal type, the materials used are also relatively small. Therefore, from the viewpoint of production energy efficiency, the thermal type is much higher than the air energy.
Use of energy-saving process: air can not be directly activated in the winter when the temperature is low, the need for electric auxiliary heating, which is also a very large energy consumption. The storage of hot water in the water tank all year round cannot be completely used cleanly, which also causes a waste of heat energy. In other words, the heat type is different. Since the current heat mode is used, how much heat is used, the heat energy reaches zero waste. Among them, BAK instant heat products also increase the heat recovery system, which effectively extracts the heat contained in the outflowing hot water and re-introduces the water pipes, thereby further reducing the rated power of the water heater itself and achieving the double energy saving effect.
It can be seen that although there are many areas where air energy can be improved in the field of energy-saving water heaters, it is difficult to achieve greater breakthroughs due to the constraints of technology and principles. If consumers want to get out of the cycle, they need such a spirit of calm exploration, from all aspects to consider, find an energy-saving water heater suitable for their own family. The instant-type electric water heater represented by BAK is bound to be able to embark on a different kind of sky in the field of energy-saving water heaters in the future.
Piezoelectric Ceramic Actuator Plate,Piezoelectric Bending Ceramic,Piezo Ceramic Diaphragm
NINGBO SANCO ELECTRONICS CO., LTD. , https://www.sancobuzzer.com