Mitsubishi has launched 50PE LED rear-projection splicing wall, which does not contain mercury, can achieve long service life, has a large color reproduction range, and can display images with higher color purity. With the characteristics of environmental protection, reliability and high image quality, it has become a "star" product.
Mitsubishi 50PE rear projection LED light source display wall box uses original 0.95′′ DMDTM single chip, resolution is 1400x1050 (SXGA+), screen element density is up to 1.9 million yuan/square meter, in the case of equal area, composed of Mitsubishi 50PE The overall resolution of the large screen is higher than the 60" or 67" display wall box. The high density of the elements makes it possible to view small details at close range when viewing a large display screen. A huge chart or map.
Mitsubishi 50PE LED light source display wall has 178° (1/2 gain ±36°) level viewing angle, 550cd/m2 (typical) screen front brightness - bright mode, 450cd/m2 (typical) screen front brightness - normal mode, 350cd/m2 (Typical) Screen brightness - energy saving mode three brightness options. 60° (1/2 gain ±10°) vertical viewing angle and 1900:1 (typical) high contrast.
In addition, the 50-inch display screen is clearer and brighter, even when installed in a place with very bright ambient light. The Mitsubishi 50PE display wall can also be set with three brightness modes, namely bright mode, normal mode and energy saving mode, to provide conditions for different user needs.
Mitsubishi 50PE rear projection LED light source display wall box uses original 0.95′′ DMDTM single chip, resolution is 1400x1050 (SXGA+), screen element density is up to 1.9 million yuan/square meter, in the case of equal area, composed of Mitsubishi 50PE The overall resolution of the large screen is higher than the 60" or 67" display wall box. The high density of the elements makes it possible to view small details at close range when viewing a large display screen. A huge chart or map.
Mitsubishi 50PE LED light source display wall has 178° (1/2 gain ±36°) level viewing angle, 550cd/m2 (typical) screen front brightness - bright mode, 450cd/m2 (typical) screen front brightness - normal mode, 350cd/m2 (Typical) Screen brightness - energy saving mode three brightness options. 60° (1/2 gain ±10°) vertical viewing angle and 1900:1 (typical) high contrast.
In addition, the 50-inch display screen is clearer and brighter, even when installed in a place with very bright ambient light. The Mitsubishi 50PE display wall can also be set with three brightness modes, namely bright mode, normal mode and energy saving mode, to provide conditions for different user needs.
Fiber Optic Distribution Box / Fiber Splitter Box is used as a termination point for the feeder cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building.
Material: PC+ABS,wet-proof, water-proof, dust-proof, anti-aging, protection grade is IP65.
Small Volume, For Indoor/Outdoor application. Compact structure,convenient installation and maintenance.
Fiber Optical Distribution Box (Plastic)
Fiber Optical Distribution Box,Plastic Fiber Optical Distribution Box,Fiber Optic Distribution Box,Optical Distribution Boxes
Sijee Optical Communication Technology Co.,Ltd , https://www.sijee-optical.com