I was a good fan of IT enthusiasts in the past. Most of my monthly living expenses were invested in IT products. But since I got married, especially when I had a little princess at home, these personal interests slowly faded out of my life. However, since the beginning of last year, when the Avatar Zhang Aunt was strong, the already tossed fire ignited quietly in her heart. Especially in the original, various poisonous things that the gods blazed out in the heart, planted wildly in my heart, finally When a few drops of Coke splashed on my beloved F on the evening of New Year's Day, not only did I extinguish several keys on my keyboard, but also ignited my tossing heart.
toss! toss! toss! ! People do not toss yo! !
It was not too late to immediately switch things up and down, and there was still a red shaft of Keiku 87 that had been taken away. It was also possible to change the lights and quickly bought things that changed the lights.
Unfortunately, during express delivery during the Spring Festival, the home of the post-holiday unit was also busy with various things. Until the present year, the daughter-in-law took the children to the park and immediately rolled out the battlefield in a small garden.
First, the protagonist: FILCO 104 ninja black shaft, a variety of shaft bodyThis big F was bought in the east of Dairy Tea in 14 years with pocket money saved in half a year.
Falco (FILCO) FKBN104ML/EFB2 "104 Ninja Creator II" mechanical keyboard black black shaft 1099 yuan Phil can 104 Ninja Creator second generation keyboard keycap adopts the full cover technology of ABS material key cap, using English ASCII distribution side Engraved, CHERRY's original black shaft, strength is easy, full paragraph sense, suitable for typing. The height of the Falco keyboard can be moderated to ensure that the wrist is in a naturally bent state and is suitable for long-term entry. Differentiated keycap heights and inclinations are used, different key rows have different keycap heights and tilt angles, so that the entire area of ​​the key area is directly linked to the encyclopedia. Originally intended to be a direct detoxification on the tea axis, after all, "Cherry's red, Filco's tea" is the most famous, but, went to the store to experience the next, only to find my strong King pointed by the tea, there is no Little bit of pleasure, then, into the black shaft. It took more than two years to feel great and helped me to dive and ascend on the DOTA ladder. I did several splashes of water and was safe and sound. This time I was sadly planted in a few drops of Coca-Cola.
Prepare to change the axis:
Everyone should be familiar with the axis of the mechanical keyboard. This time I plan to replace the missing keys: ">", "right ctrl", "right win", and "right shift". , Replace some of the commonly used balance bar keys with high-Agilent coefficients and stronger keys, such as milk white, gray shaft, etc.
Cherry axis switch _ Taobao search Taobao search is the most intelligent commodity search engine, through the operation of big data, accurate understanding of goods and users, to provide accurate personalized search experience. Direct links to s.taobao.com Hide people:
Sad reminder of Kai Kui, due to lack of time to play
Second, supporting angle: yellow flower soldering iron set, original shaft, various tools.Let's take a big picture first:
I have not played electric iron before, this time to toss, but also make up a variety of tutorial Raiders on the Internet, and then in the Ma Dan father where the single:
Electric iron _ Taobao search Taobao search is the most intelligent product search engine, through the operation of big data, accurate understanding of goods and users, providing accurate personalized search experience. Direct links to s.taobao.com As for the brand, we chose the Huanghua 907 suit with a good online reputation (with a soldering iron, a soldering iron stand, etc.), and this use effect looks good right now.
The other tools were all imported in the previous IP5 battery change.
Third, the process of changing the shaft. 1, dismantlingFirst remove the keycap
It can be seen that the steel plate has been rusted by several previous splashes of water.
In this affected area, the right shift area
You can see that there are still some Coke water stains on the broken keys.
Next is the distressed broken chrysanthemum Take the back cover screws. (Say, I haven't demolished it. How can this chrysanthemum be broken? It seems that chrysanthemum really is a fragile thing. We must protect it.)
The rear cover of the large F is still very easy to remove. After the 3 screws are removed, the card is used to gently open the top, and the bottom border is changed to a slightly hard point card.
2, change the shaft
Since I was also the first time to operate the electric iron, I used it to feel the touch while operating. I had no intention to take pictures, plus the half-way wife and children came back, busy cooking, serving the little princess and so on. , And so on after the shaft is more than 10 points more.
The middle process is not much to say, it can be regarded as scary, in which the most dangerous is that when the carriage returns, it is not careful to control the temperature, the PCB's circuit wire is welded down, but fortunately not broken, multi-spot welding Press again. In fact, there are many online tutorial videos and I will talk about my experience:
a, novice timid, it is best to try using other scrapped circuit board
b. It is best not to use the solder wire that you bought for the soldering iron. If you buy a good one, 0.8mm is enough.
c. In the process of changing the shaft, taking the shaft is the most troublesome. Therefore, it is the key to practice the off-welding, especially the combination of the tin suction device and the soldering iron. My experience is to identify the pad, make up the tin, first melt the solder joints, suction tin mouth against the soldering iron tip, first suction and then remove the iron. When tin is used, I have roughly the same number of four, and everyone can find their own feelings.
d, despite the ease of operation, even if accidentally destroyed the pad, big deal to get home appliance repair point so that the master to help you fly a line on the line, do not be afraid, this stuff is not so squeamish. At the beginning, I was afraid that I would get out of the pad. I didn't take off the tin every time and I almost took the enter key to tragedy.
Sad reminder of the Enter key solder joints, careful look should be able to see the circuit lines up. . Fortunately not scrapped
Next complete the diagram directly
Originally intended to have changed the keys of the Coke-affected area, but at the time of buying the shaft, it was intended to change the good black shaft for a few keys, but the result was not closed, and the changed shaft was basically the same. All scrapped, you can only use it first.
Next is the assembly process
Let's take a look at my solder joints
Fit the back cover
On the keycap
a messy table
software test:
This is before the change of axis, it can clearly see that several failed keys:
After the axis change:
The tossing process was fairly satisfactory, and it was also considered as a successful completion of my desire to diy a mechanical keyboard axis for many years. However, when the carriage return circuit was pulled off, it was still a bit uncomfortable. Multi-operations (this depends on whether the married woman can make more budgets so that I can practice more?)
PS: Originally this time it was also planned to change this Kai Kai 87 light. As a result, it was too late. It was only waiting for the next time. (Hey, you can cheat a wave of gold coins again.)
)
Francis turbines are the most common Water Turbine in use today. They operate in a water head from 40 to 600 m (130 to 2,000 ft) and are used primarily for electrical power production. The electric generators that most often use this type of turbine have a power output that generally ranges from just a few kilowatts up to 800 MW, though mini-hydro installations may be lower. Penstock (input pipes) diameters are between 3 and 33 ft (0.91 and 10 m). The speed range of the turbine is from 75 to 1000 rpm. A wicket gate around the outside of the turbine's rotating runner controls the rate of water flow through the turbine for different power production rates. Francis turbines are almost always mounted with the shaft vertical so as to isolate water from the generator. This also facilitates installation and maintenance.
Francis Turbine,Stainless Steel Francis Turbine,Francis Turbine Radial Flow,Stainless Steel Francis Turbine Runner
Shenyang Zhicheng Heavy Machinery Manufacturing Co., Ltd. , https://www.zhichengmachinery.com