State Grid: Confirmed Routine Audit

State Grid: Confirmed Routine Audit
State Grid reported on May 8 that the company is actively cooperating with the Audit Office's economic responsibility audit work. This economic responsibility audit is a routine audit of the institutional arrangements. Previously, some media reported that Zhu Changlin, director of the North China Branch of the National Grid, was taken away for investigation. However, the State Grid did not make an official response to this.
On May 8th, the official Weibo of the State Grid stated that the audit of the economic responsibility was based on the audit report published by the National Audit Office. In 2014, the National Audit Office plans to arrange 14 central enterprises to conduct economic responsibility audits, including 7 energy companies.
According to sources, starting from April 17, the National Audit Office dispatched hundreds of people from five special offices to the State Grid and conducted the audit of the economic responsibility of Liu Zhenya, the chairman of State Grid. However, the National Audit Office has not yet publicly announced this action, so the outside world can not be accurately informed about the focus and direction of the audit. This week, media reports said that Zhu Changlin, director of the North China Branch of the National Power Grid, was taken away by relevant authorities. The news has not yet been confirmed by the relevant parties, and the State Grid has not made an official response.
It is understood that Zhu Changlin first worked for Henan Electric Power Company. In 2013, Zhu Changlin was transferred to North China Power Grid, serving as the director and secretary of the Party Committee of the North China Branch of the State Grid Corporation of the People's Republic of China. He also serves as Assistant General Manager of the State Grid Corporation of China.

100M 8+2 port passive POE Switch for IP camera

STD-POE5203-10 supports data and power transmission through CAT.5 cables at the same time. And 8+2 port support fast connecting at 100/1000Mbps. It also supports long transmission distance at 250 meters both for power and data, therefore, it saves cost for the project that requiring long distance transmission through extender, fiber and coaxial cable etc. It reduces line losses effectively though 8-core cable supplying power same time. Max power for each port is 30W, which is for IP Camera and POE wirelessaccess point etc.


Features:


REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU.

 

Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.

 

Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

 

Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches )

 

Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.

 

Over voltage Protection:

Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed.

 

Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse.

 

Product Application:

 

7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100 Base T Uplink Port & 12V DC Power out for Powering ONU



Product Images:

POE Switches

100M POE Switch

POE Switch,POE Switches Puzzle,POE Switches 4 Port,100M POE Switch

Guangdong Steady Technology Co.LTD , https://www.steadysmps.com

This entry was posted in on